The lube oil cleaning Centrifuge removes the solids from the engine oil using centrifugal force, a force of 1000 “G’s”, or 1000 times the force of gravity. These solids are stored inside of the rotating turbine bowl, which will hold more than 10 times the solids of your engine's full-flow filters. The act of exposing the oil to 1000 “G’s” is what results in micron removal less than one. Once the particles have been removed the clean oil is then returned to the oil pan.
Engine Manufacturers typically install full-flow filters that only remove particles from oil down to 20 - 25 micron. With the addition of Spin-Clean, particles below 1 micron are removed, thus significantly increasing engine life. The time between oil change intervals is also increased saving the user time & money. Equally as important, the addition of Spin-Clean to an engine/package will significantly reduce hazardous waste, which positively impacts our environment.
Oil is the lifeblood of an engine and the cleanliness of that oil can directly impact the efficiency of the engine, the life of the engine, and the environment. When properly sized, Spin-Clean cycles the engine oil 4 times per hour ensuring proper solid particle extraction. With proper maintenance, Spin-Clean will increase engine life & oil change interval up to, but not limited to, 40 – 50%. Another Spin-Clean benefit, often overlooked, is its use as a diagnostic tool. The waste material extracted from the oil can be analyzed for several engine related problems. (ie. Coolant leaks, bearing wear).